In order to decorate our garden, usually buy some bollard lights outdoor, when you are full of joy to get our bollard lights outdoor after, you will be dumbfounded, about how to install them, the next follow me to learn how to install bollard lights outdoor.
After you get the bollard lights outdoor, you usually need some basic tools when you are ready to install them. First, you need to prepare a hammer, wrench, screwdriver, electric drill, wire cutter, wire connectors, and concrete (customized according to the location).
In your chosen location, dig a hole that is deep enough to accommodate the base of the outdoor bollard garden lights and provide adequate stability. Then place the base of the led bollard lights outdoor in the dug hole to ensure that the base is stable on the ground. If you have a level, you can use a level to adjust it.
At this time we can fix the base, our bollard lights outdoor come with pre-drilled holes, you only need to use accessory screws and nuts to fix the base to the ground.
If you choose a solar solar bollard lights outdoor, you don't have to worry about wiring. If you choose a model that needs to be connected to a power source, you need to route the wires from the back of the base and connect the wire connector to the power cord.
Insert the outdoor bollard lights ip65 into the base, make sure it matches the base exactly, use a screwdriver or other tools to adjust and test as needed to make sure the bollard lights outdoor range is as expected, then turn on the power and test whether the lamp post is working properly, if there is no problem, you can rest assured Used boldly.
Finally, backfill the excavated soil and compact it lightly to ensure the soil is stable around the base. If your conditions permit, you can get some concrete to make the outdoor bollard garden lights more stable.
The above are brief steps for our general styles of bollard lights outdoor. The specific operations may vary depending on the outdoor bollard garden lights model, geographical location, and personal experience. During the installation process, if you have any questions, please feel free to contact us.
Your message must be between 20-3,000 characters!