|
|
| Place of Origin | Henan |
| Brand Name | HNJBL |
| Certification | ISO9001 |
| Model Number | HNJBL-FP03 |
Ceiling Mounted Ethanol Fire Pits Fire Place Ball Hang Bioethanol Fireplace Ceiling
| Name | Ceiling Mounted Ethanol Fire Pits Fire Place Ball Hang Bioethanol Fireplace Ceiling |
| Material | Carbon steel |
| Size | Diameter 600mm,Height:700mm or customized |
| Fuel | Ethyl alcohol |
| Color | Black/white or customized |
| Packing | Carton/wooden box |
Dimensions:
Dome - D: 600m(23.6inch) / H: 70cm(23.6inch)
Burning time - 1.5L bio ethanol for 4h-6h burning time
The burner - Consists of a multi-chamber system with a grid
Weight - 26.5 kg(58.4lbs) complete with burner and pole
Adjusting - Fire pit can turn 360 degrees
Pros of Ethanol Fireplaces
Roof celling
Venting isn’t required, which minimizes interior heat loss
Easy to install; no flue; most allow DIY installation, which saves on installation cost; freestanding or built-in configurations available
No flue conserves interior space and allows urban dwellings to be retrofitted with the fireplace more readily than with a traditional fireplace
Packing
The fire pit will packed by Carton/wooden box
FAQ
Q:Why the flame is full over the chamber at beginning, but later on it become to a small flame in center of the chamber only?
A: We have set the burner a ignition beginning model, that is only pump very few fuel into the chamber at first 4~5 minutes. This setting is for safety consideration that no overflow in the chamber. At beginning the burning chamber temperature is low, and it take time to ignite successfully, so the fuel consumption is also low. Even setting like this, there are still lots of fuel inside the chamber before fire is on, so as soon as the fire is on, the flame will full over the chamber as fuel is all over the chamber. Right after the fuel is consumption, the flame will stay at our define setting for beginning at the smallest flame size.
